r @@ @ @
| @Number of spindle | @2 spindles | |
| @Lower spindle speed | @2,000 ..@(variable speed). | |
| @Upper spindle | @Oscillating frequency | @33E66 per minutes belt change |
| @Oscillating stroke | @0 ` 150o | |
| @Timer@ | @One minutes timer | |
| @Motor@@ | @750W breke motor@@4P@@3Σ@@200V@@2Pcs. | |
| @100W@@4P@@3Σ@@200V@@2Pcs. | ||
| @Coolant pump@ | @@40W@@2P@@3Σ@@200V@@1Pc. | |
| @Dimensions | @Machine | @W@1,100o@@D@900o@@H@1,400o |
| @Coolant@tank | @W@@400o@@D@740o@@@H@300o | |
| @Weight | @Machine | @300kg |
| @Coolant@tank | @25kgiincluding pumpj | |
@@by special lens holder. Conventional sticking lens dish can not be used.
@@Conplicate job such as sticking lens on lens dish and peeling off sticked lens
@@is eliminated without being soiled asd pitch and etc. are not used.@Stable
@@polishing can be obtained with preventing pellet flaw caused by stopping
@@spindle on account of sophisticate design.
2)@Work under 150 mm. diameter with lens radius between 20 and 100 mm. is polished.
3)@Functions are controlled by eash spindle.
4)@Upper spindle is moved following the locus of approximate ellipse with
@@warrantable mechanism and tommy-bar can be directed to spherical center on
@@concave or convex surface.
5)@Work pressure is controlled by air and tommy-bar is moved to up and down by
@@foot pedal.@Polishing time is set by timer.@Work is pressurized by pushing
@@start button and released by finishing of polishing.
6)@Abrasive liquid tank with casters is easy to handle.
